Gearboxes

RX series (single-stage)

RX series (single-stage)

Technical data

  • Gear unit gear ratio(i) : 1.30 to 8.65
  • Output torque(nm) : 36 to 830
  • Motor power range(kw) : 0.12 to 45
R series (two-stage and three-stage)

R series (two-stage and three-stage)

Technical data

  • Gear unit reduction ratio(i) : 3.21 to 289.74
  • Multi-stage gear unit reduction ratio(i) : 90 to 27,001
  • Output torque(nm) : 31 to 18,000
  • Motor power range(kw) : 0.09 to 160
RM series

RM series

Technical data

  • Gear unit reduction ratio(i) : 4.29 to 289.74
  • Multi-stage gear unit reduction ratio(i) : 134 to 27,001
  • Output torque(nm) : 270 to 18,000
  • Motor power range(kw) : 0.12 to 160
F series (two-stage and three-stage)

F series (two-stage and three-stage)

Technical data

  • Gear unit reduction ratio(i) : 3.77 to 281.71
  • Output torque(nm) : 87 to 18,000 (also in reduced backlash version)
  • Motor power range(kw) : 0.12 to 200
K series (two-stage / three-stage)

K series (two-stage / three-stage)

Technical data

  • Gear unit reduction ratio(i) : 3.98 to 197.37
  • Multi-stage gear unit reduction ratio(i) : 94 to 32,625
  • Output torque(nm) : 125 to 50,000 (also in reduced backlash version)
  • Motor power range(kw) : 0.12 to 200
S series

S series

Technical data

  • Gear unit reduction ratio(i) : 6.80 to 288.00
  • Multi-stage gear unit reduction ratio(i) : 110 to 33818
  • Output torque(nm) : 43 to 4,000
  • Motor power range(kw) : 0.12 to 22
W series

W series

Technical data

  • Gear unit reduction ratio(i) :3.20 to 75.00
  • Output torque(nm) : 12 to 180
  • Motor power range(kw) : 0.09 to 3.0
Heavy load range – HK series

Heavy load range – HK series

Technical data

  • Permitted wheel load(n) : 14,500
  • Shaft d x l(mm) : 25 × 35
  • Maximum torque(nm) : 220
  • Gear ratio : 13.8 to 106.38
Light load range - HW series

Light load range – HW series

Technical data

  • Permitted wheel load(n) : 2,500
  • Shaft d x l(mm) : 14 × 28
  • Maximum torque(nm) : 20
  • Gear ratio : 6.75 to 16.5
W series

Stainless Steel Gear

Technical data

  • Gear unit reduction ratio(i) :3.98 … 106.38
  • Max. output torque : 200
VU/VZ series

VU/VZ series

The VU and VZ designs of the VARIBLOC® wide V-belt variable speed gearmotors are used with power ranges of up to 45 kW. Typical speed setting ranges are 1:4, 1:6 and 1:8. The U- or Z-shaped power flow and numerous combination possibilities with reduction gear units mean that these speed gearmotors can be supplied in a broad range of designs. They can easily be tailored to the most diverse machine structures.

D series

D series

Series D VARIMOT® friction disk variable speed gearmotors are intended for power ranges up to 11 kW and speed setting ranges 1:4 or 1:5. The contact pressure between the driving pulley and the friction ring required for torque transmission is set automatically. The speed control can be adjusted even when the gearmotor is at a standstill.